Descargar Driver Sonido Para Windows Xp Colossus Edition 2

Hauppauge Capture for Colossus New features in the version. Adds StreamEez for the HD PVR 60: stream with Twitch and YouTube. Videos are now stored in This PC - Videos - HauppaugeVideos.

Skipback can now go to 0. Added Facecam support for Logitech webcams. Low resource mode can be turned off if you have an i7 CPU and are using Facecam. Skipback function in the Capture tab so you can record up to 16 hours in the past. Adds Facecam to recordings: To turn on the Facecam, go to the Settings tab and select your webcam in the Webcam drop down menu. On slower PCs (slower than an Intel i5), the 'Low resource mode' is turned on. Includes FaceCam frame.

Descargar Driver Sonido Para Windows Xp Colossus Edition 2 Download

The setup for frames is in the Settings tab. You can make your own frame too! Just create a png file with a megenta background where you want FaceCam to go, and drop the PNG file in Users - Public - Hauppauge Capture - Effects. It will then show up in the list of frames in the Settings menu.Comments, questions on this version? Colossus applications and Windows driver update To install the Windows driver:Leave your Colossus plugged into your PC.

Follow the following steps:. Download the Colossus driver (click the Download button above). Unzip this file to a directory you will remember, such as COLOSSUS. It will create a new folder. To install the new Windows driver, open the folder and run HCWDRIVERINSTALL.EXE.

This will install the Colossus Windows driver. At the completion of the driver install, you should see a message which says Drivers have been updated successfully.

Reboot your PC to enable the new Colossus driver.Name: ColossusDriver18310930.exeSize: 6.4 MB ArcSoft ShowBiz application:If you are an owner of Colossus and have an older version of Arcsoft ShowBiz, the new ShowBiz application will be available through Arcsoft Connect. To receive the latest version of ShowBiz, on your PC click Start/Programs/Arcsoft connect/Arcsoft connect.

Please note: You need to register with Arcsoft to get updates. WinTV v7 application: WinTV v7 application and TV tuner driver download package Note: A valid WinTV application CD-ROM (WinTV v6 or WinTV v7) will be needed to install this WinTV v7 versionAny WinTV 7 application CD can be used during the install. If you do not have your original WinTV CD-ROM but would like to update to WinTV v7 or WinTV v8, you can for $9.95 To install the WinTV v7 application update.

Download the WinTV v7 installation package to your PC. After downloading this file, the file is normally saved in the Download directory on your PC. Insert your original valid WinTV CD in your CD-ROM drive. Run wintv7cd from the Download directory on your PCDownload.

Installation notes:A valid WinTV application CD-ROM will be needed to install this WinTV v7 version. Any WinTV v6 or WinTV 7 application CD can be used during the install. If you do not have your original WinTV CD-ROM but would like to update to WinTV v7, you can for $9.95If you have a WinTV v7.2 CD-ROM with Extend, then the latest version of WinTV Extend will also be installed. To install WinTV v7 on a PC or laptop without a CD-ROM driveIf your PC or laptop does not have a CD-ROM drive, do the following:. at the conclusion of the installation a dialog box will pop up saying 'Activation required'.

Click Enter Product Code. You will find the Product code on your WinTV v7 Installation CD. Enter the Product code including dashes and dotsRelease notes for WinTV v7 version 3.9G:. Update to the WinTV-HVR-955Q driver to fix problems seen when switching channels quickly. Fixed an error 'You do not have access to make the required system configuration modifications.' .

Increased Pause Buffer bar size. Fixed TitanTV tvpi file association bug. New WinTV-NOVA-HD-USB 2 driver to fix issues in Turkey and other countries with low symbol rates.

New WinTV-HVR-1975 driver to fix issues with 6875 Symbol rate. Fixed no Extend tab showing on upgrade installation.

There are three ways of bringing audio into Colossus: through the stereo audio jacks on the A/V adapter cable, through the HDMI connector or through the optical audio connector on the back panel.When bringing audio in through the stereo jacks, audio is digitized and then recorded as MPEG-1 layer 3.When bringing audio in through the HDMI connector or the SPDIF optical audio jack, the audio is recorded in the format which is received. If the source provides AC-3 audio, the audio track is AC-3.

If the source provides AAC audio, AAC audio is recorded. There is no conversion of the audio format.DTS audio is currently not supported.AC3 -5.1 audio is preserved if you are creating an AVCHD DVD. If you are creating a standard DVD the audio will be transcoded to 2 channel. Creating MP4 files will also result in 2 channel audio.

In order for the audio pass through to operate correctly you need to configure the settings in the ShowBiz application. To do this follow the installation guide to install the Colossus drivers and the ArcSoft ShowBiz software. When finished power on the Colossus and open the ShowBiz software and click on the “record video” Icon, this will open the Capture module. Choose the audio input from the drop down menu ( RCA, SPDIF), once configured the Colossus will retain these settings. Note: the Colossus must be powered on for the pass through to operate. If you are a developer, you can bring H.264 encoded video in from either Colossus or HD PVR into VLC so it can be streamed out from your PC.

Microsoft provides a sample network transmit/receive filter set in their DirectX SDK.Here is the way this works:The HDPVR encoder filter produces transport packets. If you (the developer) create a small 'network push' filter that can receive the transport packets in the directshow graph, then forward them to a udp network address and port (for example udp://192.168.1.1:1234), then VLC is capable of receiving and rendering them.Start VLC from the command line with: vlc udp://192.168.1.1:1234. Sony Vegas does not detect AAC audio on.TS or.M2TS files.

If you are using an Xbox360, you must use either HDMI or optical audio. You can set your Xbox to output Dolby Digital in System settings / Audio settings.If you are using a PS3, you must use Component Video and optical audio in order to use your recordings in Vegas. To set your PS3 to optical audio out, in your PS3 go to Settings / Sound settings / Audio output settings. Select Optical digital and Dolby Digital 5.1 Then use an optical audio cable for recording. Colossus support for Windows Media Center (beta version)The Colossus support for Windows Media Center allows you to use the Colossus to watch, pause and record high definition TV under Windows 7 Media Center from a cable TV or satellite set top box. It operates in a similar way as other Hauppauge TV tuners for Windows Media Center, but Colossus records in high definition using H.264 encoding.Note: the Media Center support for HD PVR is for Windows 7 only.

Release and installation notesInstallation packageSize: 6.6 MBDate: Oct. 4, 2011 IR blaster setupMake sure 'Use internal blaster' is selected. Recording high definition video from an Xbox 360Note: Before connecting your Xbox 360 to the HD PVR or Colossus, connect it to your HD TV set to make the settings. By default, the Xbox 360 will be set to 1080p and HD PVR and Colossus will not work with this resolution. You will need to change your Xbox 360 to 480p, 720p, or 1080i. Connection diagramClick for larger image Watch this YouTube video for Xbox setup instructions, or look below for screen shotsStep by step instructions for the Xbox 360First, turn on your Xbox 360 and navigate to the main menu.Navigate to the last menu on the right and go into System Settings.Go into Console SettingsGo into Display.Go into the HDTV Settings.Now select the resolution you want.The HD PVR will only work with 480p, 720p, and 1080i. If your system is currently set to 1080p.

Change it to 1080i.When you select the new resolution, you will be asked if you want to keep the new settings. Please select Yes, keep these settings.You are now done.Please turn off on your Xbox 360 and connect it back to your HD PVR or Colossus using component cables. Recording high definition video from a Playstation3Note: Before connecting your PS3 to the HD PVR or Colossus, connect it to your HD TV set to make the changes to the PS3 video modes settings. By default, the PS3 will be set to 1080p and HD PVR and Colossus will not work with this resolution. You will need to change your PS3 360 to 480p, 720p, or 1080i.Connection diagramClick for larger image Watch this YouTube video for setup instructions, or look below for screen shotsStep by step instructionsBefore connecting your PS3 to the HD-PV or Colossus R, you must set the proper PS3 video output.

These are instructions on how to do this.First, navigate to the Settings column on the PS3 main screen.Scroll down to Display SettingsSelect Video Output Settings.Note: You should have your component cables attached to your TV. If not, please take a moment to attach the component cables to the TV.Select Component/D-terminal. You will then be given a confirmation and after proceeding, you need to change your TV to the component video.Next you will receive a screen were you will select the desired input resolution.HDPVR and Colossus can accept up to 1080i so select 1080i. You can also select 480p and 720p.After selecting 1080i, hit X Enter to go to the next step.Confirm that you have selected 1080i by clicking X Enter.Next you will be prompted to set up the Audio Output Settings and then click X Enter.Here you will select either audio input connector or optical digital (cable sold separately). Chose the way audio will be connected to the HD PVR/Colossus.You will be shown the audio settings. Click X Enter to continue.If you select Audio input connector you will be prompted to finalize the setup.If you have selected optical you must select the compatible formats either PCM 2ch or Dolby 5.1.After you confirm your audio settings, you may now power down the PS3 and connect it to your HD PVR / Colossus.When you open the Arcsoft capture module, select YPrPb for you video input and either RCA back (if you selected audio input connector) or S/PDIF (if you chose digital optical) for your input audio.Then capture some high definition video!